- Open Access
A whole-genome assembly of the domestic cow, Bos taurus
Genome Biology volume 10, Article number: R42 (2009)
The genome of the domestic cow, Bos taurus, was sequenced using a mixture of hierarchical and whole-genome shotgun sequencing methods.
We have assembled the 35 million sequence reads and applied a variety of assembly improvement techniques, creating an assembly of 2.86 billion base pairs that has multiple improvements over previous assemblies: it is more complete, covering more of the genome; thousands of gaps have been closed; many erroneous inversions, deletions, and translocations have been corrected; and thousands of single-nucleotide errors have been corrected. Our evaluation using independent metrics demonstrates that the resulting assembly is substantially more accurate and complete than alternative versions.
By using independent mapping data and conserved synteny between the cow and human genomes, we were able to construct an assembly with excellent large-scale contiguity in which a large majority (approximately 91%) of the genome has been placed onto the 30 B. taurus chromosomes. We constructed a new cow-human synteny map that expands upon previous maps. We also identified for the first time a portion of the B. taurus Y chromosome.
Seven years after the first whole-genome assembly of the human genome , sequencing and assembly of mammalian genomes has become almost routine. However, despite the continuing progress on sequencing technology, the assembly problem is far from solved. Assemblies of large genomes contain numerous errors, and many years of work can be dedicated to correcting errors and improving an assembly . Technical progress in computational assembly methods offers the potential to make many of these improvements far faster and more efficiently than would be possible by laboratory methods.
Having an accurate assembly of the genome of an important species provides an invaluable substrate for future research. For example, studies of genetic diversity need a good reference genome in order to catalog differences in new strains or lineages. Expression analyses that sequence RNA from various tissues rely on the genome to map out gene models and to discover such features as alternative splicing. Creating a more complete, accurate reference genome avoids much wasted effort that might result from attempts to use erroneous polymorphisms or other errors. For these reasons, the human genome program expended substantial efforts to improve the original human 'draft' assembly, which had 147,821 gaps and was missing 10% of the euchromatic regions, to a 'near-complete' draft three years later, with just 341 gaps and less than 1% of the euchromatin still missing . As that study pointed out, an improved assembly "greatly improves the precision of biological analyses ... including studies of gene number, birth and death."
To assemble the genome of the domestic cow, Bos taurus, we have augmented the latest assembly software with additional post-processing algorithms that utilize paired-end sequence information, mapping data, and synteny with the human genome to detect errors, correct inverted segments, and fill gaps in the sequence. With the help of extensive marker data, we were able to anchor approximately 91% of the assembled genome onto chromosomes. The resulting assembly provides a very high-quality resource for annotation and ongoing studies in the genetics of the domestic cow as well as comparative mammalian genomics.
Results and discussion
Our assembly of the B. taurus genome contains 2,857,605,192 bp, of which 2,612,820,649 bp are placed on one of the 30 chromosomes (Table 1). The remaining 245 Mbp are contained in unplaced contiguous sequences (contigs). Figure 1 shows the amount of sequence placed in each of the 29 autosomes and chromosome X. As the figure shows, length is inversely correlated with chromosome number, with a few exceptions, including chromosomes 11, 20, and 24.
We evaluated our assembly (University of Maryland assembly of B. taurus, release 2 (UMD2)) for completeness and correctness in several ways, comparing it to independent mapping data, to independently sequenced mRNA data, and to the alternative draft assembly produced by the Baylor College of Medicine Human Genome Sequencing Center, BosTau4.0 (BCM4). Each of the assemblies contains both 'placed' sequence, for which the location on the chromosomes is known, and 'unplaced' sequence. As shown in Table 2, the UMD2 assembly is larger than BCM4, with approximately 150 Mb (6%) more sequence placed onto chromosomes. In addition to total size, the N50 size is a very useful statistic for comparing genome assemblies: it represents the size N such that 50% of the genome is contained in contigs of size N or greater. For UMD2, the N50 contig size is 93,156 bp, while for BCM4 the N50 size is 81,627, approximately 14% smaller. Figure 2 shows that for all values from N1 to N98, the UMD2 assembly is larger than BCM4.
One of the most striking differences between the BCM4 and UMD2 assemblies is the assembly of the B. taurus X chromosome (BtX). UMD2 assigned 136 Mbp of sequence to the X chromosome, while the BCM4 assembly assigned only 83 Mbp. As we describe below, all sequence on BtX in our assembly is homologous to the human X chromosome (HsX).
Independently generated mapping data provide another measure of the quality of the assembly. Snelling et al.  created a B. taurus map from three radiation hybrid panels, two genetic maps, and bacterial artificial chromosome (BAC) end sequences. We aligned all of the 17,254 markers (of which 17,193 are unique) in their composite map (Cmap) to both assemblies. A marker was considered as matching a chromosome if 90% of the marker sequence aligned with at least 95% identity. Of the Cmap markers, 14,620 align to the UMD2 assembly's chromosomes, versus 13,699 markers (6.3% fewer) for the BCM4 assembly. A small number of Cmap markers (119 and 82 for UMD2 and BCM4, respectively) mapped to a different chromosome from the one indicated in the Cmap data.
One likely reason for the larger size and greater genome coverage of our assembly is the BAC-based assembly strategy employed by the Atlas assembler used to build BCM4 . That strategy involved breaking the genome into BAC-sized pieces, assembling those pieces using BAC reads and whole-genome shotgun (WGS) reads, and then merging the results. This strategy fails to incorporate reads that fall outside the regions covered by BACs. We estimate that at least 2% of the UMD2 assembly is missing from BCM4 due to gaps between BACs.
We directly aligned the two assemblies against each other in order to detect any major disagreements. Ten of the 30 chromosomes contain one or more large (>500 kb) discrepancies, primarily inversions but also deletions and translocations. Figure 3 illustrates two relatively large inversions, spanning 4 and 2.5 Mbp, on chromosomes 26 and 27. In both of these cases, as in all other large discrepancies, the Cmap data support the UMD2 assembly. Alignment plots for all 30 chromosomes are provided online in Additional data file 2.
We conducted a comparison between the two assemblies for differences in the number of apparent segmental duplications, focusing on the types of duplications that might confound assembly. We collected all intra-chromosomal duplicated segments from both assemblies that were >5 kb in length and >95% identical. We found that UMD2 had significantly fewer duplications of this type, 662 versus 3,098 in BCM4. If these regions were incorrectly collapsed duplications in UMD2, then coverage by WGS reads should be higher (approximately twice the genome-wide level) and mate pairs flanking the regions would show inconsistencies . However, after analyzing regions that are single-copy in UMD2 and duplicated in BCM4, we found no substantial discrepancies in either mate pairs or coverage, indicating that the regions are most likely single-copy. It is possible that BCM4 failed to merge overlapping BACs (from different haplotypes), which would give the appearance of segmental duplications; further analysis will be necessary to resolve this question.
Another indicator of assembly completeness, and also of its potential for annotation, is the extent to which known gene sequences can be mapped onto it. We aligned 8,689 independently validated full-length cow mRNA sequences to the two assemblies, using spliced alignment mapping tools (see Materials and methods). Figure 4a and Table S1 in Additional data file 1 show the number of sequences that had more than a fraction f of their bases contained in each genome for a range of f values. When all alignments of a gene are considered, UMD2 contains at least a portion of 8,659 mRNAs, compared to 8,555 for BCM4. All but two of the genes that map to BCM4 can be found in UMD2, whereas 106 are unique to UMD2 and not found in BCM4. Together, the two assemblies contain all but 28 of the mRNA sequences, as well as paralogs of 25 of the remaining 28 genes. More significant differences between the two genomes become apparent when the aligned fraction of the gene is considered. For instance, 8,042 genes have more than 90% of their bases mapped to the UMD2 genome, compared to only 7,771 genes for BCM4. We also directly compared the distributions of gene coverage between the two assemblies, shown in Figure 4b. BCM4 has relatively more genes with low coverage, while UMD2 has a greater number of genes at the highest level (95-100%) of coverage. Overall, UMD2 has a more complete representation of the genes while containing nearly every gene in BCM4, and therefore provides a more comprehensive resource for gene annotation.
Single nucleotide differences
In a base-by-base comparison, the UMD2 and BCM4 assemblies have >2.0 million single-nucleotide differences (SNDs). Some of these might be valid haplotype differences, in which the two assemblies are both correct, while others might be errors. We focused our analysis on a subset of positions where the underlying read data indicated that the position was highly likely to be homozygous, because a large majority (or all) reads agreed with one another. We also required that each SND was flanked by 50-bp exact matches in both assemblies (see Materials and methods), which reduced the set of SNDs to 389,015. We then looked for cases where no more than one read confirmed one assembly, and all other reads (at least three) confirmed the other assembly. The UMD2 assembly contains 10,636 instances of these apparent errors versus 30,750 in the BCM4 assembly. Thus, there were approximately three times more apparently erroneous SNDs in the BCM4 assembly.
Another way to look at fine-grain accuracy is to compare the assembly to independently generated sequences. We compared both assemblies to six finished BACS, from a different cow than the source of the whole-genome project. These BAC clones were not used in either the UMD2 or BCM4 assemblies. Ninety-six percent of the BAC sequence is contained in UMD2, versus 91% in BCM4. Considering only the portions of the BAC sequence that matched, the average disagreement between the BACs and UMD2 was 0.58%, whereas for BCM4 the discrepancy rate was 0.96%. Although some of these mismatches are likely due to true polymorphisms, the excess discrepancies in BCM4 are likely to represent erroneous base calls, indicating a higher error rate in BCM4.
The B. taurusY chromosome
Because two-thirds of the data came from a female cow, and the male DNA was based on a BAC library (Materials and methods), only a very limited amount of the assembly can be assigned to the Y chromosome. (It is worth noting here that the BCM4 assembly does not assign any sequence to the Y chromosome.) We aligned all unplaced contigs to the human Y chromosome in an effort to identify B. taurus Y sequence, and we identified 71 contigs that map to Y. When contigs in the same scaffolds were included, the total increased to 94 contigs, covering 832,527 bp. These contigs include a portion of the male sex determination gene SRY . Because few of these contigs are currently ordered with respect to one another, further work will be required to construct a better picture of the Y chromosome's structure.
Comparison to the human genome
Although humans are closer to mice than to cows, cows and humans have sufficient DNA sequence similarity to enable us to map the human genome almost entirely onto cow. Previous efforts based on mapping data showed that human and cow have approximately 201 homologous blocks of DNA . We used flexible criteria (see Materials and methods) to align all cow chromosomes to all human chromosomes, creating a new, high-resolution synteny map of human and cow. A region was considered a homologous synteny block (HSB) if the human-cow alignment extended for at least 250 Kbp and if it was not interrupted by an inversion or by an HSB on another chromosome. If two HSBs were interrupted by a gap of <3 Mbp and nothing else fell in that gap, the two blocks were merged. (Note that if a large region of synteny is interrupted by a distinct HSB, the interruption creates three HSBs.) A modified Oxford grid, shown in Table 3, shows the numbers of syntenic blocks shared between all human and cow chromosomes.
Our new, more-detailed map largely agrees with previously identified blocks, with a number of important differences. In a few cases, our map has fewer HSBs between a pair of chromosomes, but in many more cases, we detected new synteny blocks that had been missed previously; most of these were inversions or interruptions in larger blocks. Overall, our map increases the total number of HSBs to 268. These were created from 245 evolutionary breakpoints (268 minus 23 human chromosomes) that have appeared since the divergence of human and cow. For example, BtX and HsX were previously reported to share seven HSBs . Figure 5, which shows the alignment of BtX and HsX, reveals that five large blocks cover most of the two chromosomes, with one additional, much smaller block of 800 Kbp spanning the region from approximately 24.5 Mbp to 25.3 Mbp in BtX. Not visible on this scale, though, are seven additional inversions, bringing the total number of HSBs for the X chromosome to 14. We found no HSBs on BtX that mapped to any other human chromosomes besides X.
We also considered how many human genes can be found in the cow genome. For this analysis, we only considered curated human genes from the National Center for Biotechnology Information (NCBI) RefSeq database. We identified 25,710 RefSeq proteins representing 18,019 distinct human genes (many with alternative isoforms), and aligned these to the cow genome. Of the 18,019 human genes, 17,253 (95.7%) mapped to cow using our criteria. This left 766 genes that failed to map. Of these, 111 are annotated as 'hypothetical' proteins and may represent inaccurate gene models in human. The remaining 655 human genes failed to map either because they are too divergent or because the cow assembly is too fragmented or contains gaps in the regions containing those genes. Using the identical methods, we found that 17,107 human genes mapped onto the BCM4 assembly. Of the unmapped genes, 693 failed to map onto either assembly, 219 mapped onto UMD2 but not on BCM4, and 73 mapped onto BCM4 but not UMD2.
One surprising result was our finding that the initial assembly contained two unusual contaminants, Acinetobacter baumannii and Serratia marcescens. These bacteria are not used as sequencing reagents and are not usually detected when screening for contaminants; they appear to represent environmental contamination. The bacterial contigs, totaling 43,311 bp in 14 contigs, were removed from the UMD2 assembly, but are provided on our ftp site .
These results illustrate how the information contained in the read data for a whole-genome sequencing project provide a valuable resource for continuing improvements to a genome, and how independently generated data can be merged into WGS data to produce a better assembly. The resulting improvements should provide immediate benefits to the research community, with whom we hope to work to improve the assembly further. Until the assembly is truly finished - a state that no mammalian genome, including human, has yet reached - we will continue to incorporate new data to fill in gaps, to correct mis-oriented regions, and to place more sequence onto chromosomes. The genomes of alpaca and sheep, which are currently being sequenced, should provide a rich source for making further improvements based on evolutionary conservation between these closely related mammals.
Materials and methods
We downloaded approximately 37 million B. taurus reads from the NCBI Trace Archive. The original sequencing was conducted at the Baylor College of Medicine, and the BCM4 assembly was produced by the Atlas assembly program  and released to the public in October 2007. BCM4 was the fourth and final assembly, with previous releases occurring in 2004, 2005, and 2006. For the UMD2 assembly, no sequences other than the BCM traces were used. We trimmed the reads to remove vector sequence using Figaro , which automatically determines vector sequence by identifying common prefixes in the reads. We trimmed the 3' end of the reads so that the mean error rate (computed from the quality scores) was <2.5% for any window of ≥ 40 bases. Our trimming and quality control routines yielded approximately 35 million trimmed reads, providing approximately 9.5× coverage of the genome. We next computed sequence overlaps among the trimmed reads using the UMD Overlapper [11, 12], which includes an error-correction step that corrects sequencing errors in regions of sufficient coverage.
The sequencing strategy for B. taurus was a mixture of the WGS approach and a BAC-by-BAC approach. In the latter method, large-insert clones (BACs) of 100-150 Kbp are sequenced separately and then assembled. The WGS strategy, by contrast, samples the entire genome. For B. taurus, approximately 24 million reads were generated by WGS sequencing and approximately 11 million reads came from BACs. As a consequence, regions of the genome covered by BACs have significantly deeper coverage than the rest of the genome. This property in turn will confuse most WGS algorithms, which use coverage statistics to identify repetitive regions of a genome. To avoid this problem, we modified the Celera Assembler (CelAsm) program  to compute coverage and repeat statistics using only WGS reads. We then ran the modified CelAsm on the entire data set.
Further complicating the project was the fact that the source DNA originated from two animals, a father-daughter pair. The source of the BAC library DNA was Hereford bull L1 Domino 99375, registration number 41170496, with blood provided by Michael MacNeil's laboratory, USDA-ARS, Miles City, Montana. The DNA for the WGS sequences came from white blood cells from L1 Dominette 01449, American Hereford Association registration number 42190680 (a daughter of L1 Domino 99375), and was provided by Dr Timothy Smith's laboratory, US Meat Animal Research Center, Clay Center, Nebraska. The use of two animals increases the expected amount of diversity between haplotypes. Most of the reads were produced using a paired-end sequencing strategy, using clone inserts in two sets of sizes: several short libraries of 2-5 kb and several BAC-sized libraries of 150-200 kb.
Table S2 in Additional data file 1 summarizes the assembly after the initial run of CelAsm. The initial assembly contained 2.858 Gbp, with a maximum scaffold size of 15.1 Mbp and a total of 194,643 contigs. The initial contigs and scaffolds were mapped onto chromosomes and further improved as described below, and the final assembly statistics are shown in Table 1.
Mapping the assembly onto the chromosomes
We used two sets of markers in the initial placement of the CelAsm scaffolds for UMD2: BAC ends from the IBBMC fingerprint map ; and the 17,524-marker composite map (Cmap) of Snelling and colleagues.
The fingerprint map (IBBMC) is a HinDIII restriction map of 290,797 BACs that were assembled into 655 contigs and anchored on the B. taurus chromosomes . Many of these BACs were end-sequenced from one or both ends, and we retrieved these sequences from the GSS database at NCBI. We were able to align 108,100 of BAC-end sequences onto our B. taurus genome assembly, using the requirement that each sequence align with >90% identity over >85% of its length. Most BAC ends matched with >98% of the sequence over >99% of their lengths. The MUMmer package  was used for these alignments and for the Cmap alignments. (The BCM4 marker positions for Cmap data were obtained directly from the BCM ftp site .) We manually examined some of the disagreements between FPmap and Cmap, and found that occasionally the FPmap appeared to jump to the wrong chromosome. Because Cmap is based on three independent sets of map data, we used Cmap to detect and correct such derailings and to create a 'corrected fingerprint map' (CFPmap). We then used this CFPmap to place our initial assembly onto the 30 B. taurus chromosomes. We also used CFPmap to correct 54 CelAsm scaffolds by splitting them into two or more pieces and separately placing the pieces onto chromosomes.
We then placed additional contigs and scaffolds onto the chromosomes if they were linked by three or more consistent mate-pair links to the placed scaffolds. We defined 'consistent' as: all mate pairs indicated the same relative orientation; and the standard deviation of the implied placement was consistent with that from the libraries for each mate pair.
Orienting contigs using cow-human alignments
Scaffolds (sets of linked contigs) that were mapped onto chromosomes using only a single marker could not be oriented from the marker information alone. We oriented many of these scaffolds by taking advantage of the overall conserved synteny between cow and human. First, all cow scaffolds were aligned to the human genome using nucmer  with its maximal unique match (mum) option in order to avoid alignments of repetitive sequence. For each alignment of a previously unoriented scaffold to human, all alignments within 100 Kbp on each side were pulled out for analysis. A score S was computed for each unoriented scaffold, taking into account whether the scaffolds surrounding S on both sides (in cow) were mapped to a consistent set of locations in human. If the scaffolds surrounding S were oriented, and if a large majority of these scaffolds on both the left and right agreed on the orientation, then S was assigned that orientation. Using this procedure, 1,840 scaffolds containing 4,011 contigs were oriented.
We developed a similar procedure to assign unplaced contigs to chromosomes, again relying on conserved synteny between cow and human. First, all unplaced contigs were aligned as above. Mummer's 'delta-filter' program was then used to compute a one-to-one mapping of the unplaced contigs to human so that only the best aligning contig was considered at each region in human. For each unplaced contig's best alignment to human, the matching region in cow was identified via our human-cow syntenic map, and all contigs from this region were extracted for examination. We only considered placing a contig on a B. taurus chromosome if the order and direction of the surrounding contigs in cow matched the corresponding region in human. As above, we examined the alignments of nearby cow contigs that aligned within 100 kb of the unplaced contig's alignment in human. If the region of cow-human synteny contained no rearrangements, then the unplaced contig was placed at the location indicated by these alignments. Using this procedure, 1,046 contigs were placed on chromosomes. One consequence of this procedure was that a number of incompletely mapped genes (based on mRNA alignments) were completed.
Haplotype variant removal
While evaluating the assembly for correctness, we found many examples of contigs placed along the chromosomes that aligned nearly identically with nearby contigs. When the two copies of each chromosome in a diploid genome diverge sufficiently, a genome assembler will be unable to merge the reads coming from the two haplotypes into a single consensus sequence. Instead, it partitions the reads into two separate contigs. In such cases, both contigs will have mate-pair links to surrounding contigs, and the assembler may place them very close to each other (usually adjacent) in the assembly. Although the ideal solution to this problem is to produce two complete copies of each chromosome, one for each parental haplotype, this solution is not possible with current technology. Therefore, we must retain one of the haplotypes and remove the other.
To detect and correct the haplotype variant problem, we aligned each contig to all contigs nearby. Those that aligned with >97% identity for >90% of their length were removed from the assembly and placed in a separate haplotype variants file. This procedure removed 3,010 contigs, totaling approximately 6 Mbp of sequence.
Single nucleotide difference evaluation
We aligned the assemblies using the MUMmer suite of programs, and identified all positions where a 1-base mismatch was flanked by 50 bases that exactly matched on each side, and we further required that each assembly have at least 4 reads that aligned to these positions. Differences included substitutions, insertions and deletions. Note that this method excluded regions with multiple, closely spaced SNDs. We then matched all SND regions (101 bp each) against all B. taurus reads, seeding the alignments with exact 20-mer matches. An alignment of a SND to a read was considered valid if the entire SND region matched the assembly with a maximum of five errors.
For the comparison to the six finished B. taurus BACs, the following clones were downloaded from GenBank: gi|171461043, gi|171461042, gi|171461041, gi|171461040, gi|171461039, and gi|167744683. All six of these clones were sequenced and finished by BCM.
The scaffolder in CelAsm orders and orients the contigs into scaffolds based on the mate-pair relationships between reads. When the ends of contigs have low-quality, erroneous sequence, the scaffolder will place the contigs adjacent to one another and fail to merge them, even though the contigs actually overlap. To correct this problem, we post-processed scaffolds to replace overlapping contigs with a single joined contig, using a simplified version of the joining method described previously for the genome of T. vaginalis . First, we aligned with nucmer  the ends of contigs estimated to have a gap between them of <1 Kbp. If the alignment showed that the contigs overlapped by at least 40 bp at 94% identity, with at most 20 bp of overhanging sequence, and the gap size implied by the overlap was <3 standard deviations of the estimated gap size, we stitched the pair of contigs together. The stitched sequence was composed of the left contig's sequence through the overlap region, concatenated with the region of the right flanking sequence past the overlap. The stitching processes each scaffold in order so chains of multiple contigs can be stitched together into a single large contig. The stitching process replaced 1,076 contigs (average size: 45.9 Kbp) with 534 joined contigs (average size: 91.7 Kbp), closing 542 gaps (average gap size: -822 bp).
Gap closing by the 'shooting' method
Many of the gaps in a whole-genome assembly are due to repetitive sequences. For these sequences, an assembler must be very careful that it does not connect two non-contiguous regions of a genome. In many cases, gaps that remain after the assembler is finished can be resolved by carefully exploiting mate-pair information. We developed an algorithm to span gaps within a scaffold that enumerates all possible paths in the overlap graph (defined by overlapping reads). If exactly one of the paths is consistent with the mate-pair distances, then we can 'shoot' across the gap along that path. Using this algorithm, we were able to close 4,612 gaps, spanning approximately 8.34 Mbp in total.
Human-cow syntenic map construction
The entire human genome was aligned to each chromosome of B. taurus using the MUMmer suite of programs, anchoring alignments with exact matches of at least 40 bp and requiring the alignment anchors to be at least 100 bp in length. Aligned regions ranged from 82 to 94% identity, and most alignments were 500-5,000 bp in length, likely corresponding to coding regions.
Messenger RNA alignment
Known full-length gene sequences were downloaded from the RefSeq project at NCBI (release date: November 10, 2008) . Of the 24,293 genes, only the 8,689 mRNAs promoted from experimentally validated sequences and identified with the code 'provisional' were retained. Sequences were aligned to the BCM4 and the UMD2 genomes using the high-throughput mapping tool ESTmapper [19, 20], retaining all spliced alignments longer than 100 bp and with ≥ 95% sequence identity as significant. This procedure produced 12,069 alignments for 8,555 genes on the BCM4 genome and 12,460 alignments for 8,659 genes on the UMD2 genome, which were used to analyze the gene content of the two genomes. Alignments were also produced with an alternative mapping tool, GMAP , and used to confirm and classify the observed discrepancies in gene content between the two assemblies. For each gene, a 'coverage' value in each genome was computed as the fraction of its bases contained in all alignments of the gene, and the numbers of genes mapped at various coverage cutoffs were plotted.
For the human-cow gene alignments, we mapped 25,710 human proteins representing 18,109 unique gene IDs (in the NCBI RefSeq database) to the cow genome using tools that translated the genome in all six frames. The human genes were chosen by collecting all reviewed or validated RefSeq proteins that had explicit chromosomal coordinates. We performed cascading searches using blat, tblastn and exonerate to align the human proteins to DNA sequences, and we considered a protein present if it mapped across at least 40% of its length (with at least 70% similarity).
The complete assembly has been deposited at GenBank as accession DAAA00000000; the version described in this paper is the first version, DAAA01000000. The assembly is also on our ftp site .
Additional data files
The following additional data are available with the online version of this paper. Additional data file 1 contains two tables: Table S1 lists the number of RefSeq genes mapped to each of the two assemblies at varying levels of coverage; Table S2 lists the summary statistics for the initial, unimproved assembly of B. taurus. Additional data file 2 is a figure showing alignments between the UMD2 and BCM4 assemblies for all 30 chromosomes.
bacterial artificial chromosome
Baylor College of Medicine assembly of B. taurus, release 4
B. taurus X chromosome
corrected fingerprint map
homologous synteny block
Homo sapiens X chromosome
National Center for Biotechnology Information
single nucleotide difference
University of Maryland assembly of B. taurus, release 2
Venter JC, Adams MD, Myers EW, Li PW, Mural RJ, Sutton GG, Smith HO, Yandell M, Evans CA, Holt RA, Gocayne JD, Amanatides P, Ballew RM, Huson DH, Wortman JR, Zhang Q, Kodira CD, Zheng XH, Chen L, Skupski M, Subramanian G, Thomas PD, Zhang J, Gabor Miklos GL, Nelson C, Broder S, Clark AG, Nadeau J, McKusick VA, Zinder N, et al: The sequence of the human genome. Science. 2001, 291: 1304-1351. 10.1126/science.1058040.
Celniker SE, Wheeler DA, Kronmiller B, Carlson JW, Halpern A, Patel S, Adams M, Champe M, Dugan SP, Frise E, Hodgson A, George RA, Hoskins RA, Laverty T, Muzny DM, Nelson CR, Pacleb JM, Park S, Pfeiffer BD, Richards S, Sodergren EJ, Svirskas R, Tabor PE, Wan K, Stapleton M, Sutton GG, Venter C, Weinstock G, Scherer SE, Myers EW, et al: Finishing a whole-genome shotgun: release 3 of the Drosophila melanogaster euchromatic genome sequence. Genome Biol. 2002, 3: RESEARCH0079-10.1186/gb-2002-3-12-research0079.
The International Human Genome Sequencing Consortium: Finishing the euchromatic sequence of the human genome. Nature. 2004, 431: 931-945. 10.1038/nature03001.
Snelling WM, Chiu R, Schein JE, Hobbs M, Abbey CA, Adelson DL, Aerts J, Bennett GL, Bosdet IE, Boussaha M, Brauning R, Caetano AR, Costa MM, Crawford AM, Dalrymple BP, Eggen A, Wind Everts-van der A, Floriot S, Gautier M, Gill CA, Green RD, Holt R, Jann O, Jones SJ, Kappes SM, Keele JW, de Jong PJ, Larkin DM, Lewin HA, McEwan JC, et al: A physical map of the bovine genome. Genome Biol. 2007, 8: R165-10.1186/gb-2007-8-8-r165.
Havlak P, Chen R, Durbin KJ, Egan A, Ren Y, Song XZ, Weinstock GM, Gibbs RA: The Atlas genome assembly system. Genome Res. 2004, 14: 721-732. 10.1101/gr.2264004.
Phillippy AM, Schatz MC, Pop M: Genome assembly forensics: finding the elusive mis-assembly. Genome Biol. 2008, 9: R55-10.1186/gb-2008-9-3-r55.
Whitfield LS, Lovell-Badge R, Goodfellow PN: Rapid sequence evolution of the mammalian sex-determining gene SRY. Nature. 1993, 364: 713-715. 10.1038/364713a0.
Wind Everts-van der A, Larkin DM, Green CA, Elliott JS, Olmstead CA, Chiu R, Schein JE, Marra MA, Womack JE, Lewin HA: A high-resolution whole-genome cattle-human comparative map reveals details of mammalian chromosome evolution. Proc Natl Acad Sci USA. 2005, 102: 18526-18531. 10.1073/pnas.0509285102.
UMD2 assembly FTP site. [ftp://ftp.cbcb.umd.edu/pub/data/Bos_taurus]
White JR, Roberts M, Yorke JA, Pop M: Figaro: a novel statistical method for vector sequence removal. Bioinformatics. 2008, 24: 462-467. 10.1093/bioinformatics/btm632.
Roberts M, Hunt BR, Yorke JA, Bolanos RA, Delcher AL: A preprocessor for shotgun assembly of large genomes. J Comput Biol. 2004, 11: 734-752. 10.1089/cmb.2004.11.734.
Roberts M, Zimin AV, Hayes W, Hunt BR, Ustun C, White JR, Havlak P, Yorke J: Improving Phrap-based assembly of the rat using "reliable" overlaps. PLoS ONE. 2008, 3: e1836-10.1371/journal.pone.0001836.
Myers EW, Sutton GG, Delcher AL, Dew IM, Fasulo DP, Flanigan MJ, Kravitz SA, Mobarry CM, Reinert KH, Remington KA, Anson EL, Bolanos RA, Chou HH, Jordan CM, Halpern AL, Lonardi S, Beasley EM, Brandon RC, Chen L, Dunn PJ, Lai Z, Liang Y, Nusskern DR, Zhan M, Zhang Q, Zheng X, Rubin GM, Adams MD, Venter JC: A whole-genome assembly of Drosophila. Science. 2000, 287: 2196-2204. 10.1126/science.287.5461.2196.
Kurtz S, Phillippy A, Delcher AL, Smoot M, Shumway M, Antonescu C, Salzberg SL: Versatile and open software for comparing large genomes. Genome Biol. 2004, 5: R12-10.1186/gb-2004-5-2-r12.
BCM FTP Site. [ftp://ftp.hgsc.bcm.tmc.edu]
Carlton JM, Hirt RP, Silva JC, Delcher AL, Schatz M, Zhao Q, Wortman JR, Bidwell SL, Alsmark UC, Besteiro S, Sicheritz-Ponten T, Noel CJ, Dacks JB, Foster PG, Simillion C, Peer Van de Y, Miranda-Saavedra D, Barton GJ, Westrop GD, Müller S, Dessi D, Fiori PL, Ren Q, Paulsen I, Zhang H, Bastida-Corcuera FD, Simoes-Barbosa A, Brown MT, Hayes RD, Mukherjee M, et al: Draft genome sequence of the sexually transmitted pathogen Trichomonas vaginalis. Science. 2007, 315: 207-212. 10.1126/science.1132894.
Delcher AL, Phillippy A, Carlton J, Salzberg SL: Fast algorithms for large-scale genome alignment and comparison. Nucleic Acids Res. 2002, 30: 2478-2483. 10.1093/nar/30.11.2478.
Pruitt KD, Tatusova T, Maglott DR: NCBI reference sequences (RefSeq): a curated non-redundant sequence database of genomes, transcripts and proteins. Nucleic Acids Res. 2007, D61-65. 10.1093/nar/gkl842. 35 Database
Florea L, Di Francesco V, Miller J, Turner R, Yao A, Harris M, Walenz B, Mobarry C, Merkulov GV, Charlab R, Dew I, Deng Z, Istrail S, Li P, Sutton G: Gene and alternative splicing annotation with AIR. Genome Res. 2005, 15: 54-66. 10.1101/gr.2889405.
strail S, Sutton GG, Florea L, Halpern AL, Mobarry CM, Lippert R, Walenz B, Shatkay H, Dew I, Miller JR, Flanigan MJ, Edwards NJ, Bolanos R, Fasulo D, Halldorsson BV, Hannenhalli S, Turner R, Yooseph S, Lu F, Nusskern DR, Shue BC, Zheng XH, Zhong F, Delcher AL, Huson DH, Kravitz SA, Mouchard L, Reinert K, Remington KA, Clark AG, et al: Whole-genome shotgun assembly and comparison of human genome assemblies. Proc Natl Acad Sci USA. 2004, 101: 1916-1921. 10.1073/pnas.0307971100.
Wu TD, Watanabe CK: GMAP: a genomic mapping and alignment program for mRNA and EST sequences. Bioinformatics. 2005, 21: 1859-1875. 10.1093/bioinformatics/bti310.
This work was supported in part by NIH grants R01-LM006845 and R01-GM083873 to SLS and R01-HG002945 to JAY, and by USDA grant 2008-04049 to SLS and JAY. The authors wish to thank the Human Genome Sequencing Center at the Baylor College of Medicine for generating the raw sequence data and making it publicly available at the NCBI Trace Archive.
AVZ, ALD, MCS, DP, and MR collected sequence data and ran assemblies. LF, FH, and GP aligned protein and transcript sequences and evaluated assembly completeness based on annotation. MCS, GM, MR, and PS re-assembled to close gaps and evaluated SNDs. CPVT and TSS provided mapping data and AVZ integrated map markers into the assembly. DAK and SLS aligned cow and human assemblies to improve orientation and to evaluate cow-human synteny. ALD and DP scanned for and removed contaminating sequences. JAY and SLS conceived the experiments and analyses. AVZ, ALD, LF, and SLS wrote the manuscript. All authors read and approved the final manuscript.
Electronic supplementary material
About this article
Cite this article
Zimin, A.V., Delcher, A.L., Florea, L. et al. A whole-genome assembly of the domestic cow, Bos taurus. Genome Biol 10, R42 (2009). https://0-doi-org.brum.beds.ac.uk/10.1186/gb-2009-10-4-r42
- Bacterial Artificial Chromosome
- Additional Data File
- Bacterial Artificial Chromosome Library
- Bacterial Artificial Chromosome Sequence
- Cmap Data