- Open Access
PEMer: a computational framework with simulation-based error models for inferring genomic structural variants from massive paired-end sequencing data
Genome Biology volume 10, Article number: R23 (2009)
Personal-genomics endeavors, such as the 1000 Genomes project, are generating maps of genomic structural variants by analyzing ends of massively sequenced genome fragments. To process these we developed Paired-End Mapper (PEMer; http://sv.gersteinlab.org/pemer). This comprises an analysis pipeline, compatible with several next-generation sequencing platforms; simulation-based error models, yielding confidence-values for each structural variant; and a back-end database. The simulations demonstrated high structural variant reconstruction efficiency for PEMer's coverage-adjusted multi-cutoff scoring-strategy and showed its relative insensitivity to base-calling errors.
Following the sequencing of the genomes of hundreds of species over the past years, measuring variation within individuals of a species - such as across human beings - has become a center of attention in genomics . While it was long assumed that most of the variation in our genomes is due to single nucleotide polymorphisms (SNPs), the relative importance of another form of genomic variation has been recognized more recently: these are structural variants (SVs), frequently referred to as copy-number variants (CNVs), and here defined as kilobase to megabase sized deletions, insertions, duplications, and inversions. SVs presumably contribute to more base-pair differences between individuals than SNPs [2, 3]. Furthermore, they may have considerable effects on human phenotypic variation  by causing common 'normal' phenotypic differences [4, 5] and contributing to disease susceptibility [6–9].
A necessary prerequisite for identifying the functional impact of SVs on the genome is the construction of a comprehensive, high-resolution map of SVs across many individuals. However, relatively few approaches are available so far that allow mapping SVs at high resolution and in a cost-efficient manner. Previously, computational approaches have been described that enable detection of SVs at high resolution by either evaluating SNP genotyping information (for example, [10, 11]), scoring high-density microarray platforms [12–15], measuring DNA sequence read densities , detecting split sequence reads , or comparing different human genome assemblies [18–20]. Each of these complementary approaches enables the identification of at least a subset of SVs at a reasonable confidence level. However, each method also has drawbacks in terms of overall sensitivity, effective resolution, or efficiency.
Recent surveys have used paired-end sequence reads to detect SVs in several individuals at high resolution [21–23], enabling identification at high confidence and subsequent analysis of hundreds of SV breakpoint sequences [21, 22]. Several paired-end sequence read based methods have been described [21–25], some of which employ next-generation DNA sequencing. One such approach is high-resolution and massive paired-end mapping (PEM) . Paired-end based approaches, including PEM, have several advantages over other SV-detection approaches. They allow SV-reconstruction at higher effective resolution than SNP genotyping-based algorithms and have a higher sensitivity than present microarray-based approaches, which are typically to some extent affected by cross-hybridization in repeat-rich regions. Furthermore, in contrast to SNP genotyping and microarray-based as well as read-depth-based approaches, they enable the identification of copy-number balanced SVs, such as inversions. Moreover, the comprehensive and high-resolution SV identification facilitated by PEM is more economical than assembly comparison or split read analysis. PEM is presently becoming more affordable due to the ongoing developments and cost decreases in next-generation DNA sequencing. Thus, PEM has recently been adopted for SV mapping in personal genomics endeavors such as the 1000 Genomes project and other personal human genome sequencing projects [23, 26] as well as for the mapping of structural alterations in cancer tissues .
Thus far, paired-end sequence read-based surveys have mostly used custom approaches for SV detection, partially with ad hoc criteria. Although experimental validations indicated a reasonably successful performance of these approaches, a suitably parameterized approach to SV calling will be necessary to generate high confidence SV sets and to optimize the specificity and sensitivity of SV calling. In this regard it is evident that future studies that will utilize dense maps of structural variation in the genome for associating SV genotypes with phenotypic data will rely on high-confidence methods for SV calling. We thus developed a computational approach, Paired-End Mapper (PEMer), for mapping SVs at high resolution with a confidence measure and then analyzing them with a built-in database. Incorporated error models based on extensive simulations facilitated parameterization of PEMer and an evaluation of its performance. We benchmarked the computational approach on different datasets to show that it achieves SV assignments with improved sensitivity and specificity over previous paired-end sequence read based approaches for SV identification. PEMer can process data from several next-generation DNA sequencing platforms, for example, platforms from 454 (Roche), Illumina, and ABI. PEMer can be downloaded from , where instructions on how to install the framework are provided.
Optimal computational detection of SVs using PEMer
The paired-end sequence reads based method PEM, as well as the underlying strategy used for scoring PEM data, are depicted schematically in Figure 1. In PEM, the end stretches of randomly picked genomic DNA fragments of an individual are sequenced and compared to a reference genome. For that purpose, initially, random genomic DNA fragments with a known and fairly tight size distribution are generated. For instance, the PEM protocol from 454/Roche involves hydrodynamic shearing resulting in a lognormal fragment length distribution centered at the median fragment length, or insert size, L (for example, with L = 2.5 kb; Figure 1). In PEM, indels relative to the reference genome are identified by relating the distance in base-pairs between the fragment ends mapped onto the reference genome (that is, the paired-end span) to the known insert size distribution (Figure 1). Furthermore, by comparing the relative orientations or positions of mapped ends inversions or more complex SV events (see Materials and methods) relative to the reference genome can be identified. Our approach PEMer uses an optimized pipeline for calling SVs from datasets generated by several different next-generation sequencing platforms. Therefore, PEMer implements a number of subsequent computational procedures, or steps, which have been developed as a set of modular components (described in detail in the Materials and methods section; see also Figure 1). First, in the 'construct pre-processing' step, the data are formatted into a proper structure. Second, in the 'read-alignment' step ends are first rapidly indexed against and then carefully aligned onto a reference genome. Third, pairs of mapped ends are combined into paired ends in the 'optimal paired-end placement' step. When processing relatively short sequenced ends (for example, such as those generated with the Solexa/Illumina or SOLiD/ABI platforms) we recommend novel read-indexing approaches that directly compensate for variation in the mappability of short sequences in the context of a complex, repeat-rich reference genome [28, 29]. Fourth, in the 'outlier-identification' step outlier paired ends are recognized. Outliers are characterized by ends mapping onto the reference genome with a distance that is significantly deviating from expected paired-end spans (indicating an SV indel) or by ends matching onto different strands of a chromosome (indicating an inversion) or in different order relative to each other (potentially indicating a complex SV). Fifth, the 'outlier-clustering' step combines paired ends that likely originated from the same SV into clusters. Sixth, clusters obtained using different parameterizations - that is, by applying different cluster sizes and according cutoffs for outlier identification - are joined in the 'cluster-merging' step. Cluster-merging further enables combining data from different PEM libraries or from different next-generation sequencing platforms. This in turn helps increase the size range at which SVs can be detected and may add extra confidence in SV assignments through support from independent libraries or platforms.
Finally, PEMer reports the merged clusters, which can be displayed and stored. To facilitate the display, storage, and further analysis of variants, our approach contains a special database for handling SV data from various sources. The database, for which a schematic is depicted in Figure S1 in Additional data file 1, allows for a smooth connection between called SVs, clusters of outlier paired ends, and the underlying sequence reads. The database enables consideration of complex SV assignments from base-pair resolution data - different SVs may partially overlap in their genomic coordinates or they may be 'embedded' within each other. As such, they may have occurred as a consequence of subsequent, partially intersecting de novo events affecting the same haplotype. Accordingly, we developed a recursive data definition for SVs, in which the coordinates of a SV may be stored either with respect to the reference genome or with respect to one another (Figure 2).
Parameterization and benchmarking of PEMerusing simulations
It is critical to properly parameterize PEMer in order to optimize the specificity, sensitivity, and resolution of the approach. Since the highly non-uniform nature of the human genome causes difficulties in deriving a parameterization analytically, we chose to use simulations for estimating parameters and SV-calling efficiency. Namely, we placed sets of SVs into a known reference DNA sequence, and then used the modified genomic sequence to simulate PEM experiments. Specifically, simulations were carried out in the context of the general repetitive structure of the genome, with SVs randomly placed relative to highly repetitive elements and segmentally duplicated regions. In our simulations, we furthermore applied a realistic PEM fragment size distribution and a reasonable span coverage (that is, physical coverage, taking into account the amount of DNA sequence in the reference genome spanned by paired ends) expected to be sufficient for detecting most SVs. Instead of using the entire human reference genome, we performed the simulations on a diploid chromosome 2. (The euchromatic regions of chromosome 2 encompass approximately 8% of the genome; thus, simulations required relatively little computing time.) The genomic background was altered by randomly introducing a set of SVs of various sizes near the expected boundary of resolution of PEMer. For instance, we initially chose to generate sets of 100 heterozygous deletions, respectively, in sizes of 1, 2, 3, 4, 5, 6, and 10 kb. These are arbitrary, but suitable, SV set sizes enabling an evaluation of the sensitivity of PEMer. In addition, we also simulated different SV types. Finally, we simulated PEM data generated with different library insert size distributions and with different next-generation DNA sequencing platforms (see below).
Three essential parameters influence the performance of PEMer: the span coverage λ (which is proportional to the insert size L; see Materials and methods); the minimum number N of clustered outlier paired ends necessary for calling a SV; and the cutoff C for calling outliers. Based on the Poisson approximation, we initially estimated that for a diploid genome, a span-coverage λ of 4.75× will be minimally required to cover 95% of the heterozygous SVs within the detection range of PEM by at least two paired ends (see supplementary methods and notes in Additional data file 1). For simplicity, we applied a rounded λ = 5× in most analyses below. We then used PEMer to reconstruct SVs in the simulated genomic DNA and evaluated its performance by applying various values for C and N. We generally applied three distinct strategies for SV identification.
The 'single cutoff' strategy was implemented as the previously most widely applied scoring approach for identifying SVs from PEM data (for example, described in ). The single cutoff applies a fixed required cluster size N of 2 and regards paired ends as outliers if the measured paired-end span exceeds a certain cutoff C, which is typically set at 3 standard deviations from the median (the median usually can be interchanged with the mean; note, for example, that in case of the 454/Roche platform the median is essentially identical to the mean in log-space). All outlier clusters of size N = 2 or larger are considered as SVs, whereas unclustered outliers are discarded. The cluster-merging step is unnecessary when applying this strategy.
In the 'multi-cutoff' strategy different cluster sizes N from 2 to 6 were applied together with different corresponding cutoffs C for outlier identification (Table S1 in Additional data file 1 and Figure 3). Note that, in theory, N = ∞ represents the limit; however, in reality at λ = 5× we did not observe additional SV calls when setting N to values greater than 6. The multi-cutoff strategy enables an enhanced resolution compared to the single cutoff strategy. In this regard, for a given cluster size N we conservatively defined the optimal cutoff C as the one for which no false positives and a maximum possible number of reconstructed SVs were observed in our simulations.
The 'simplified multi-cutoff' was implemented as a compromise between the single cutoff and the multi-cutoff, using only cluster sizes N of 2, 3 and 4. During our simulations, results for the simplified multi-cutoff were nearly identical to the multi-cutoff strategy (Table 1), but had the benefit of a decreased computing time (see below).
We initially assessed the SV-reconstruction capability of PEMer for heterozygous deletions by simulating data from the 454/Roche platform, and observed that the single cutoff is efficient and sufficient for the reconstruction of deletions of 4-5 kb or longer (Table 1). However, the multi-cutoff strategy was clearly superior for reconstructing SVs smaller than 4 kb. When applying both strategies with a realistic simulation-based sequencing error (see below) and with parameters resulting in similar false positive call rates, respectively, 30% additional events smaller than 4 kb and 73% additional events smaller or equal to 2 kb were identified with the multi-cutoff compared to the single cutoff, whereas the reconstruction efficiency for events >4 kb was similar among both strategies. Interestingly, the simplified multi-cutoff achieved results that are practically the same as for the multi-cutoff (Table 1) with a decreased computing time. This suggests the existence of a boundary on the optimal cluster size N at a given span coverage.
False positives were recorded during the simulations as SV calls of any type (deletion, insertion, inversion, or complex) generated by outlier paired ends not resulting from a simulated SV. As we describe in Additional data file 1, we further monitored the generation of false positive calls from chimeric PEM library inserts  and found that the effect of such chimera on the false positive rate is negligible. Furthermore, we determined the expected genome-wide number of false positives by scaling the observed number of false positives with the factor 'size of the diploid genome divided by the size of the diploid chromosome 2'. We also derived an analytical formula for calculating numbers of expected false positive deletions and insertions (see Materials and methods) and validated the formula by comparison with the simulation-based results. This enabled us to calculate E-values and P-values for both SV types (Table S2 in Additional data file 1 and Materials and methods). We defined as the false positive rate the number of detected false positives scaled by the number of SVs that we expect to be ascertainable with paired-end sequence-based approaches operating at the size range of PEM - for example, approximately a thousand when using the 454/Roche platform . Using conservative cutoffs expected to result in a false positive rate of approximately 5%, when applying 1,000 as the scaling factor, PEMer reconstructed approximately 90% of all simulated heterozygous deletions >4 kb with λ = 5× (see Results for all three strategies in Table 1), that is, approximately 95% of the SVs expected to be ascertainable (when relating the observed 90% to the 95% of events expected to be ascertainable at λ = 5×; see supplementary methods and notes in Additional data file 1). The rate of false positives can be reduced to near zero by applying more stringent cutoffs, which leads to a slightly diminished reconstruction efficiency (Table S3 in Additional data file 1).
Furthermore, we also analyzed heterozygous inversions and insertions by simulation. Specifically, we found that at 5× span coverage heterozygous inversions can be recovered with high reconstruction efficiency (>95%; Table S4 in Additional data file 1) and highly significant E-values (based on simulations; Table S2 in Additional data file 1). On the other hand, heterozygous insertions were reconstructed with poor efficiency (<10%) and at a small size-range when using a 2.5 kb insert size (Table S5 in Additional data file 1). Note, however, that when using a larger insert size of 10 kb, we observed a marked improvement of the reconstruction efficiency for insertions - to up to 70% - without reduction in the portion of reconstructed deletions (Table S6 in Additional data file 1). Note further that with a large insert size PEM becomes more cost-efficient, as longer DNA stretches are covered per sequenced base-pair.
We would like to stress that in most of our simulations, we conservatively assumed heterozygosity of SVs - that is, we assumed single instances of SVs per diploid genome. However, a large portion of SVs is homozygous [21, 22]. As homozygous SVs display two instances per diploid chromosome set, they are usually covered by more paired ends and, thus, are more easily ascertainable than heterozygous SVs. To exemplify the higher sensitivity of PEM towards homozygous SVs, we simulated the reconstruction of homozygous deletions (Table S7 in Additional data file 1). Specifically, at a false positive rate of approximately 5%, more than 97% of the simulated homozygous deletions >4 kb were identified with λ = 5×. Furthermore, we observed an increased sensitivity in detecting SVs <4 kb (compare, for example, Table 1 and Table S7 in Additional data file 1). Finally, owing to the higher frequency at which homozygous SVs tend to be spanned by paired ends relative to heterozygous SVs, homozygous SVs are usually reconstructed with more highly significant E-values (see Table S2 in Additional data file 1; i.e. more highly significant E-values are achieved for SVs with a high number of spanned paired ends).
Finally, thus far we have focused on simulations of data from the 454/Roche next-generation sequencing platform. In the past months, PEM protocols have been developed by short-read-based next-generation sequencing platforms, including the Solexa/Illumina as well as the SOLiD/ABI platform. In order to assess the SV reconstruction efficiency for PEM data produced with a short read generating platform, we examined the SV-mapping capabilities of the Solexa/Illumina platform at 5× span coverage. Specifically, we applied a realistic paired-end insert size distribution centered at 250 bp and reasonable cutoffs for outlier identification (Table S8 in Additional data file 1) and observed a reconstruction efficiency for heterozygous deletions that is comparable to the rate at which SVs are identified by the 454/Roche platform (Table S9 in Additional data file 1).
Sensitivity to sequencing errors
We also investigated the effect of sequencing errors on SV calling by reconstructing SVs using two sets of reads, with and without sequencing errors, introduced at a rate reflective of the respective next-generation sequencing platform. To this end, we have included specific error models for different sequencing platforms in our simulations (see Materials and methods). Notably, when testing the effect of sequencing errors on data from the 454/Roche platform, we found that sequencing errors only slightly affected the effective span coverage of PEM by decreasing it by 1.3%. Interestingly, when assessing the reconstruction efficiency using heterozygous deletions as an example, we found that sequencing errors had a negligible effect on SV calling for most SV sizes (Table 1). Nevertheless, a somewhat more pronounced effect was observed for short (<5,000 bp) SVs, for which, in general, more reads were required to enable SV assignments. Thus, SVs with a size at the margin of PEMer's detection range appear generally (slightly) more sensitive to sequencing errors. We further observed that sequencing errors at a level typically occurring in 454 Sequencing have little influence on the overall false positive rate (Table 1).
Some genome studies analyze genomes at a span coverage considerably higher than 5×, with values of λ at 25× or higher. When expanding our simulations to allow for parameterization of PEMer at λ = 25× (Table S1 in Additional data file 1), we found that at such a span coverage deletions down to 3 kb are efficiently reconstructed in PEM datasets generated by the 454/Roche platform: in particular, 97% of all SVs of 3 kb in size are called at λ = 25×, whereas only 49% are called at 5× (Table S3 in Additional data file 1; Figure 4). Thus, the sensitivity in detecting smaller deletions generally increases significantly at high span coverage. We note that when using high span coverages, generally large values of N should be used. For example, at λ = 25×, N = 5 represents a suitable minimum cluster size (Table S1 in Additional data file 1), whereas smaller values of N lead to numerous false positives. Thus, notable gains in sensitivity and resolution can be achieved at high span coverage at the cost of a linear increase in sequencing costs.
Modular design, alignment algorithms, and time complexity of PEMer
The sheer complexity and size of next-generation sequencing data sets impose challenges on procedures applied for mapping, storage, and analysis of the data , particularly in the light of novel ongoing large-scale human genome sequencing projects (for example, the 1000 Genomes project). Thus, we have put a lot of effort into optimizing PEMer, and carefully evaluated its time complexity. In particular, we found that the run time scales approximately linearly with the number of reads. Furthermore, the approach can be easily parallelized by processing bundles of sequencing reads on separate nodes of a computing cluster. If a genome as large and complex as the human genome is analyzed, read-alignment represents the time-limiting step of PEMer, taking approximately two-thirds of the computing time. To take this into account and to increase the flexibility of PEMer for next-generation sequencing technologies, PEMer has been developed in a highly modular fashion. For example, 454 Sequencing data can be rapidly mapped against the genome using two alternative indexing algorithms, that is, Megablast  or BLAT ; then high-quality alignments are constructed using the Smith-Waterman algorithm (see Materials and methods). By default, Megablast is used for indexing 454/Roche data, since we found Megablast to be slightly more sensitive than BLAT when using several parameter sets, albeit at the cost of a slight increase in computing time (Table S10 in Additional data file 1). On the other hand, Solexa/Illumina and SOLiD/ABI data are by default indexed using the fast MAQ algorithm  (see Materials and methods).
To exemplify the applicability of PEMer for processing large datasets we recorded basic timing data in the course of processing PEM data within the 1000 Genomes project (Table S11 in Additional data file 1). Specifically, PEMer required approximately 28,000 CPU hours for processing 74 million paired-end reads generated with the 454/Roche platform using a median fragment size of 2.5 kb. In this case, a large fraction of 454/Roche-specific linker sequences had already been mapped prior to PEMer analysis, leading to a considerable decrease in computing time, as linker-mapping is responsible for approximately a quarter of the overall computing time. To achieve a realistic estimate, we thus only considered the previously unmapped reads and estimated that 16,000 CPU hours would be required to map 10 million reads, the equivalent of approximately 4.5× span coverage of a diploid human genome. On a large-scale computing cluster with approximately 400 CPUs, application of PEMer to map SVs in a single individual is thus normally completed in approximately 2 days.
Benchmarking PEMeron previously published paired-end datasets
Finally, we applied PEMer on previously published paired-end datasets  from a presumably European female (NA15510) and an African female (NA18505) to evaluate whether the approach indeed allows for an increased efficiency in SV calling. We therefore estimated optimized cutoffs and applied the simplified multi-cutoff strategy to search for additional SVs not previously reported using a stringent cutoff expected to result in 0% false positives (based on simulations). Our analysis revealed 18 SV indel events overlooked previously , which are summarized in Table S12 in Additional data file 1: that is, 16 in NA18505 and 2 in NA15510, an individual that had been sequenced at relatively low (approximately 2×) span coverage. We analyzed all novel SVs manually on the UCSC browser, and found that out of these 18, 15 (83%) overlapped with previously identified SVs listed in the Database of Genomic Variants . Furthermore, the high resolution of our SV calls allowed us to infer plausible SV formation mechanisms for 11 (61%) SVs (Table S12 in Additional data file 1), including all three that did not intersect with variants listed in the Database of Genomic Variants. In particular, we inferred that five SVs were likely formed by retrotransposition . Furthermore, in six instances satellite DNA expansions appear to have caused SV formation. For the remaining SVs we were not able to discriminate between possible formation mechanisms [21, 22] owing to the lack of high-resolution breakpoint data. Furthermore, as expected, all novel SV calls were near the expected boundary of resolution of PEMer. This led, for example, to an increase of 30% in the rate at which deletions <4 kb were detected compared to a previous study using the 454/Roche platform , indicating a gain in sensitivity and resolution at the margin of previous PEM-based scoring approaches.
We have developed a computational approach, PEMer, which facilitates the identification of SVs from large-scale PEM data. PEMer enables processing data from several widely applied next-generation sequencing platforms. We parameterized PEMer with a newly developed simulation framework, and demonstrated using simulations and real datasets that this results in an improved SV-calling performance at the margin of previous paired-end-based approaches. Thus far, surveys mapping small SVs systematically across several individuals have been lacking despite an abundance of SVs at this size range. In particular, when re-scoring a recently published dataset with PEMer, we were able to report 18 additional SVs beyond the detection range of previous computational approaches for scoring PEM data. We provided independent evidence for all 18 SVs using data-mining and sequence analysis, suggesting a low false positive rate in SV calls.
We note that the herein described simulations were carried out using reasonable parameter settings. Realizing the utility of simulations to parameterize SV-calling methods, we decided to make available our simulation software to the community in conjunction with PEMer. We realize that our simulation software may also be useful in distinct contexts where paired ends are being used successfully, such as for transcript analysis [36, 37] or the detection of gene fusions caused by recurrent translocations in cancer .
Our study also has certain limits, as discussed below.
With regard to the simulations, we did not specifically generate SVs with breakpoints embedded in long stretches of repetitive sequence - such as segmental duplications that may induce SV formation through non-allelic homologous recombination. Specifically, a portion of SVs formed through non-allelic homologous recombination is likely to be overlooked by PEMer due to the relatively short length of sequenced end stretches (for example, approximately 110 bp for the 454/Roche platform and <40 bp for the Solexa/Illumina or SOLiD/ABI platforms), which hampers unambiguous genomic alignments. In this regard, note that all presently available SV-detection approaches (including microarray-based approaches) are limited in terms of detecting SVs embedded in segmental duplications, and that the true extent of such SVs is thus unknown.
Single nucleotide polymorphisms
The simulations currently do not consider the presence of SNPs in the sample genome. Similar to base-calling errors, SNPs, which, on average, affect 1 in a 1,000 bases, may lead to read misalignment, particularly in repetitive regions with diminished mappability such as segmental duplications. Note, however, that the catalogue of known SNPs is presently incomplete in these genomic regions. Note further that the optimal paired-end placement step can, to some extent, compensate for both base-calling and SNP-based misalignment errors (see supplementary methods and notes in Additional data file 1).
Insertions versus deletions
Due to the insert size distributions commonly used in PEM, the size range at which insertions can be identified is considerably smaller than for deletions and inversions. Particularly, large insertions (for example, events ≥ 3 kb when using a median insert size of 2.5 kb) may be missed when merely analyzing significant deviations from the mean paired-end span. Note that this problem can, in part, be compensated for by selecting a range of insert size distributions (see, for example, Table S6 in Additional data file 1) and by reconstructing large SVs as mated insertions . For personal-genomics efforts such as the 1000 Genomes project it will thus make sense to generate more than one paired-end library per sample, with one library optimally involving a relatively large insert size (that is, 10 kb or larger). Note that these libraries can be analyzed at fairly low additional costs, as relatively small numbers of paired ends are required to achieve sufficient span coverage when using large insert sizes.
Genome expectation statistics
We estimated the likelihood for covering a genomic element using the Poisson-approximation, assuming that SVs and paired ends are uniformly distributed in the genome. Furthermore, our simulations also assumed a uniform distribution of SVs in the genome. We realize that, in the future, concepts applied in this study may be extended by using more sophisticated models of genome expectation statistics such as the 'genome structure correction' used in the recently published Encode consortium paper , which considers the distribution of gaps, repeats, and SVs in the reference genome.
Specifically in relation to present limits, we would like to emphasize the design of PEMer as a modular tool, for which specific parts can be fairly easily optimized and improved. Examples for possible improvements include the consideration of novel approaches for compensating for the variation in the mappabilty of reads within the reference genome , and an improvement of the overall computing time when processing large datasets. For example, in relation to the current read-alignment step, we realize that a considerable amount of time may be saved by applying novel, time-efficient sequence alignment approaches geared towards the specific read lengths applied in the study.
Interestingly, the influence of sequencing errors on SV calling is minor - for example, when compared to the influence of base-calling errors on SNP-assignments. In the future, next-generation sequencing technologies that allow for longer DNA sequence reads than presently feasible will increase the sensitivity of PEMer in repeat-rich regions by ensuring that ends are mapped onto the correct location in the genome.
Lastly, while our paper was in preparation, Lee et al.  published an alternative approach for SV detection based on paired-end sequence reads. In contrast to PEMer, the approach by Lee et al. has been developed for processing Sanger dideoxy sequencing reads, rather than next-generation sequencing reads. While it is likely that both approaches or concepts thereof will be applied for SV detection in the future, a preliminary comparison of both approaches indicates a higher overlap with previously reported SVs for PEMer calls compared to calls by the Lee et al. approach (see supplementary methods and notes in Additional data file 1). One possible explanation for this observation may be a higher specificity of SV calls generated by PEMer compared to the approach by Lee and colleagues.
In conclusion, PEMer facilitates SV detection from large-scale next-generation DNA sequencing datasets on a normal computing cluster. We would like to point out that early versions of PEMer have already been used extensively in studies focusing on several individual genomes (1000 Genomes project and ). Recognizing the increased usage of paired-end sequencing technologies for personal genomics [23, 26] and for high-resolution SV surveys [21, 22], we decided to make the code of PEMer, together with executables and a proper documentation, available to the community over the world-wide web.
Materials and methods
Components and modules included in PEMer
PEMer consists of the following modular components, which are by default executed in the order given below.
Initially, PEM data are formatted into a proper structure. For example, when processing data from the 454/Roche platform, the standard 44 bp linker sequence (GTTGGAACCGAAAGGGTTTGAATTCAAACCCTTTCGGTTCCAAC) from the 454/Roche paired-end protocol is identified (for example, at a minimum sequence identity of 90%) and fragments split into paired ends using the linker as a seed. PEM data generated with the Solexa/Illumina or SOLID/ABI platforms are pre-processed and initially aligned to the reference genome using MAQ .
In this step, both ends are independently aligned with the reference genome. When using 454 data, by default, a computational approach that combines efficient initial heuristic genome alignment (that is, using Megablast  by default with parameters: '-p 80 -s 11 -W 11', or, alternatively, using BLAT  with parameters '-fastmap') and comprehensive optimal realignment (that is, using the Smith-Waterman algorithm ) is used. As mentioned above, MAQ  (default parameters) is normally used for processing Solexa/Illumina or SOLiD/ABI data. In principle, any sequence alignment algorithm can be plugged into PEMer for read alignment.
Optimal paired-end placement
In this step, when processing data from the 454/Roche platform, an adapted version of the placement algorithm  is implemented to enable the identification of most plausible paired-end alignments. This is particularly important in cases where alignments are ambiguous due to the repetitive nature of the human genome. In brief, the placement algorithm executes a cost function that penalizes outlier paired-end assignments, if one or both ends display high sequence similarity to a different genomic locus and if placing the end(s) into the alternative locus would result in a non-outlier paired end (see supplementary methods and notes in Additional data file 1). When processing Solexa/Illumina or SOLiD/ABI paired-end data, PEMer by default omits the abovementioned placement algorithm, and instead considers paired ends as optimally placed if each end unambiguously aligns against the reference genome with a MAQ  'mapping quality' of at least 20. This score-cutoff  ensures unambiguous optimal placement of short reads onto the reference genome.
Paired ends are considered as outliers if they map with a relative orientation of ends, or genomic position, consistent with structurally altered genomic regions - for example, if they fall outside the expected range of paired-end spans. Paired ends falling beyond the expected range of spans are identified based on a cutoff C expressed in terms of standard deviations from the median L and the according cutoff points C i and C d (Figure 1). The cutoff points are usually derived from simulations and depend on the span coverage λ, the cluster size N, and the distribution of paired-end spans. Alternatively, the cutoff points may be derived from experimental controls, or may be estimated directly from the sample data. Note that PEMer by default discards outlier paired ends in which both ends map to different chromosomes (that is, putative translocations).
Outliers are categorized into SVs if a cluster of N (or more) independent paired ends is consistent with a single SV. PEMer evaluates whether all paired ends in a cluster are indicative of the same event. In other words, a simple intersection of paired ends may be insufficient - for example, if two intersecting paired ends indicate deletions with significantly different predicted deletion sizes. (Thus, a window for the proper clustering of paired ends is defined in PEMer, as described below in the section 'Estimating E-values and P-values'.) Deletions are identified from ≥ N overlapping discordant paired ends with a paired-end span >C d (with the condition that both putative breakpoints are spanned). Insertions may be identified from ≥ N overlapping discordant paired ends exhibiting a paired-end span <C i . Inversions are identified using ≥ N paired ends that are discordant in terms of orientation relative to the reference genome and are consistent with a single inversion breakpoint - that is, in such a way that all paired ends span a single, common breakpoint interval. In addition to those simple SV events, more complex events  may be identified by PEMer: mated insertions are identified from ≥ N unpaired SVs that lie in nearby genomic regions and have ≥ N paired ends indicating a connection with a (common) distal genomic region <100 kb in size. Mated insertions may involve tandem duplications, or translocations. Unmated insertions are predicted from ≥ N paired ends that support a rearrangement of a genomic region in which loci change relative order without changing their relative orientation (that is, both ends map to the same DNA strand).
Clusters consistent with the same SV are merged into a single cluster. This step is necessary when SVs are searched in parallel with distinct cutoffs and cluster sizes (for example, when using the multi-cutoff or simplified multi-cutoff strategy, or when results from paired-end datasets generated with different insert sizes or different next-generation sequencing platforms are combined).
Simulation of PEM experiments
We performed simulations with a diploid chromosome, which enabled evaluation of both the efficiency of SV reconstruction and the false positive rate of PEMer. In particular, we used human chromosome 2, the chromosome with the largest determined length as well as an average repeat content and gene density. While we regard the selection of chromosome 2 as a reasonable pick to save computational processing time during the simulations, future studies may use other chromosomes or entire genomes in haploid or diploid form to parameterize PEMer. SV events were randomly generated, that is, distributed uniformly on the chromosome as described above. When simulating the reconstruction of heterozygous SVs, no events were introduced on the second copy of chromosome 2, which was included only to monitor the false positive rate. For example, when simulating PEM data generated by the 454/Roche platform, first, random shearing of the sample genome was carried out by randomly picking DNA fragment lengths from a given lognormal distribution with reasonable values for median (that is, 7.8 in log-space) and standard deviation (0.29 in log-space), which both were obtained from a typical PEM experiment. Second, fragment centers were uniformly placed along the chromosomes. Third, DNA fragment circularization, random cleavage and linker read isolation were simulated by first generating read lengths from the length distribution of sequences resulting from a typical 454 run (that is, the Roche GS-FLX-system), then by placing 'centers' for the 44 bp linker sequence uniformly onto the read, then by placing the linker sequence onto that center, and, finally, by assigning sequences of DNA fragment ends to the read ends not occupied by the linker. To achieve the expected topology of paired ends in the circulated DNA (Figure 1) the 5'-end of the fragment was assigned to the 3'-end of the read and vice versa. Fourth, the resulting fragments, which were in principle undistinguishable from real genomic fragments generated by the PEM method indicated in Figure 1, were subjected to PEMer for SV detection.
Finally, simulation parameters can be easily adapted to platforms generating short PEM end tags (see Tables S8 and S9 in Additional data file 1 for an example involving the simulation of Solexa/Illumina data).
Error models for next-generation DNA sequencing
Optionally, error models may be applied in our simulations to consider typical next-generation sequencing errors. For example, our simulations enable considering the major two causes of errors in 454 Sequencing, that is, insertion of nucleotides and homopolymer errors. In the error model we assumed that signals observed from a homopolymer of length n follow a Gaussian distribution with mean n and the standard deviation being proportional to the square root of n with coefficient 0.17, while the background follows a lognormal distribution with mean 0.2 and standard deviation 0.1 (Figure S2 in Additional data file 1) [42, 43]. We used intersection points of the curves as cutoff points for calling a particular DNA sequence for a given signal. For instance, signals in the range 0.56 to 1.43 were called as a single sequenced nucleotide (Figure S2 in Additional data file 1), rather than a homopolymer (that is, dimer). Nucleotide flow was simulated in the following order: T, A, C, G. For every nucleotide sequenced (including homopolymers and single nucleotides) the observed signal was generated either from a background distribution - in cases where the flowed nucleotide was different from the nucleotide to be sequenced - or otherwise from the corresponding Gaussian distribution. The overall sequencing error rate was 2.5%.
For the Solexa sequencing error we approximated the average substitution rate of the Solexa/Illumina platform  using a simple model involving a fourth degree polynomial. The polynomial was used to assign substitution probabilities at each base position during the simulation. If at a given sequenced position a substitution was assigned by the simulation procedure, a randomly picked, different nucleotide was inserted at the position in question. The average sequencing error rate was 1.5%.
While our simulations were designed for optimizing the parameters of PEMer and, thus, for improving the resolution over earlier approaches, we realize that future studies may aim for broader and more realistic simulations of PEM-based studies. To facilitate future simulations involving PEM data generation and scoring, we have made the code of our simulation scripts available to the public together with PEMer.
Development of a specialized breakpoint database
To allow storage, display and manipulation of SV data as well as consistency between different sets of SVs, we implemented a database module for our approach. In particular, a web-accessible database, BreakDB, was developed, which holds a variety of data along with each SV entry. A diagram of the BreakDB schematic, illustrating the database tables and their relationships, is depicted in Figure S1 in Additional data file 1. Data inserted into BreakDB can easily be manipulated for subsequent analyses of the SV data - for instance, high-resolution breakpoint information (i.e. the genomic coordinates of breakpoint-junctions), the expected overall coverage of SVs in a particular genome estimated based on the Poisson approximation  (see Additional data file 1), and results of breakpoint junction analyses by BLASTN  can be added to a SV entry and mined once becoming available. Therefore, the database has a versioning system, so that all changes to an event are archived and are viewable within the application. BreakDB contains information such as the coordinates, flanking and inserted sequences (in case breakpoints are known), potentially the suggested molecular mechanism leading to SV formation, and supporting evidence for the SV entry. With more SVs identified at base-pair resolution, their representation in databases becomes challenging as the coordinates of independently occurred SV events that subsequently affected the same locus may overlap in a complex fashion. To deal with such scenarios, subsequent SV events - for example, an insertion of genomic DNA followed by inversion and deletion of parts of the sequence - can be defined recursively in BreakDB (Figure 2). Thus, a SV event can be defined with respect to the current version of the reference genome (build36), or, in case of complex embedded SVs, with respect to another SV. Periodically, as a SV collection becomes stabilized, a release is generated and displayed as consistent, static pages.
Estimating E-values and P-values
PEMer computes E-values and P-values for the different types of SVs identified in PEM datasets. Specifically, given a certain span coverage we can estimate the total number of optimally placed paired ends. Let us assume the span coverage is calculated as λ = NL/G, where N = number of optimally placed paired ends, L = median insert size, and G = diploid genome size; thus, rearranging N = λG /L. Now, let us introduce a set Y of discordant paired ends with N h elements and a span beyond a cutoff H indicative of deletions, that is, all paired ends with a span larger than a cutoff expressed in terms of standard deviations SD from the mean of the distribution of spans. Note that as for H > 2 × SD the frequency of occurrence of the span lengths decreases faster than exponentially, effectively all spans in the set Y are approximately of length H.
Consider consequently placing N h paired ends randomly onto the genome and checking whether the n-th newly placed paired end forms a proper cluster with the already placed n-1 paired ends. The probability to cluster will be:
P(n) =(n-1)W h /(0.5 G)
where W h is the effective window size applied for clustering long paired ends (i.e., paired-ends indicative of deletions), (n-1)W h represents the number of nucleotides where the n-th paired end may fall in order to form a proper cluster with any previously placed paired end, and 0.5 G is the non-redundant length of the genome (that is, the size of the haploid genome). Note that since all paired ends are effectively of given size H, W h /2 is simply the maximum separation between the ends of two pairs so that that they still cluster. We further assume that Y covers the genome sparsely, thereby neglecting the effect of window overlap from different paired ends. Thus, the total number of clusters will be:
where E h is the expected number of false positive deletions, or an E-value in relation to the number of randomly clustered 'long' discordant paired ends of set Y. Similarly, one can generalize the equation for calculating the number of false positives for k (2 or more) overlapping paired ends:
By using similar reasoning, one can estimate that the expected number E s of false positive insertions is:
where N s is the number of 'short' discordant paired ends at cutoff S indicative of insertions and W s is the effective window size applied for clustering short paired ends (i.e., such indicative of insertions).
PEMer detects SVs by clustering long and short events separately and is flexible in terms of defining W h and W s , which are used to cluster paired ends based on compatibility in sizes and locations of ends. Thus, the values W h and W s are introduced to simplify the clustering procedure and to obtain an analytical description of the false positive rate. We estimated that when clustering two paired ends the window sizes correspond roughly to the cutoff used for clustering W h ~H and W s ~ S. By comparison with simulated data we also found that the effective W h doubles when tripling the minimum required number of paired ends in a cluster while W s gets twice longer when doubling the minimum required number of paired ends in a cluster; therefore, we obtain the general dependency W h ~ (k + 1)H/3 and W s ~ kS/2. Thus, the amount of false positives is estimated as:
In order to calculate P-values (P; the chance that a given event with a given cutoff occurred at random), we need to convert the number of randomly generated events E into the probability that an event will happen at least once. Assuming the number of false positives in a given experiment follows a Poisson distribution with mean E, we can use the known analytical expression P = 1 - exp(-E), with for clusters of 'long' paired ends and for clusters of 'short' paired ends. Here, N q is the quantile of events corresponding to the 'shortest'/'longest' paired end of length Q in the cluster defining a deletion/insertion.
Examples of E-values for identified SVs are given in Table S2 in Additional data file 1. We usually operate with E-values rather than with P-values, as they can be more intuitively understood. For E < 0.01, P and E are nearly identical.
Additional data files
The following additional data are available with the online version of this paper: Additional data file 1 includes supplementary methods, Figures, and Tables.
- PEMer :
single nucleotide polymorphism
genomic structural variant.
Pennisi E: Breakthrough of the year. Human genetic variation. Science. 2007, 318: 1842-1843. 10.1126/science.318.5858.1842.
Feuk L, Carson AR, Scherer SW: Structural variation in the human genome. Nat Rev Genet. 2006, 7: 85-97. 10.1038/nrg1767.
Redon R, Ishikawa S, Fitch KR, Feuk L, Perry GH, Andrews TD, Fiegler H, Shapero MH, Carson AR, Chen W, Cho EK, Dallaire S, Freeman JL, Gonzalez JR, Gratacos M, Huang J, Kalaitzopoulos D, Komura D, MacDonald JR, Marshall CR, Mei R, Montgomery L, Nishimura K, Okamura K, Shen F, Somerville MJ, Tchinda J, Valsesia A, Woodwark C, Yang F, et al: Global variation in copy number in the human genome. Nature. 2006, 444: 444-454. 10.1038/nature05329.
Stranger BE, Forrest MS, Dunning M, Ingle CE, Beazley C, Thorne N, Redon R, Bird CP, de Grassi A, Lee C, Tyler-Smith C, Carter N, Scherer SW, Tavare S, Deloukas P, Hurles ME, Dermitzakis ET: Relative impact of nucleotide and copy number variation on gene expression phenotypes. Science. 2007, 315: 848-853. 10.1126/science.1136678.
Perry GH, Dominy NJ, Claw KG, Lee AS, Fiegler H, Redon R, Werner J, Villanea FA, Mountain JL, Misra R, Carter NP, Lee C, Stone AC: Diet and the evolution of human amylase gene copy number variation. Nat Genet. 2007, 39: 1256-1260. 10.1038/ng2123.
Gonzalez E, Kulkarni H, Bolivar H, Mangano A, Sanchez R, Catano G, Nibbs RJ, Freedman BI, Quinones MP, Bamshad MJ, Murthy KK, Rovin BH, Bradley W, Clark RA, Anderson SA, O'Connell RJ, Agan BK, Ahuja SS, Bologna R, Sen L, Dolan MJ, Ahuja SK: The influence of CCL3L1 gene-containing segmental duplications on HIV-1/AIDS susceptibility. Science. 2005, 307: 1434-1440. 10.1126/science.1101160.
Aitman TJ, Dong R, Vyse TJ, Norsworthy PJ, Johnson MD, Smith J, Mangion J, Roberton-Lowe C, Marshall AJ, Petretto E, Hodges MD, Bhangal G, Patel SG, Sheehan-Rooney K, Duda M, Cook PR, Evans DJ, Domin J, Flint J, Boyle JJ, Pusey CD, Cook HT: Copy number polymorphism in Fcgr3 predisposes to glomerulonephritis in rats and humans. Nature. 2006, 439: 851-855. 10.1038/nature04489.
Sebat J, Lakshmi B, Malhotra D, Troge J, Lese-Martin C, Walsh T, Yamrom B, Yoon S, Krasnitz A, Kendall J, Leotta A, Pai D, Zhang R, Lee YH, Hicks J, Spence SJ, Lee AT, Puura K, Lehtimaki T, Ledbetter D, Gregersen PK, Bregman J, Sutcliffe JS, Jobanputra V, Chung W, Warburton D, King MC, Skuse D, Geschwind DH, Gilliam TC, et al: Strong association of de novo copy number mutations with autism. Science. 2007, 316: 445-449. 10.1126/science.1138659.
Walsh T, McClellan JM, McCarthy SE, Addington AM, Pierce SB, Cooper GM, Nord AS, Kusenda M, Malhotra D, Bhandari A, Stray SM, Rippey CF, Roccanova P, Makarov V, Lakshmi B, Findling RL, Sikich L, Stromberg T, Merriman B, Gogtay N, Butler P, Eckstrand K, Noory L, Gochman P, Long R, Chen Z, Davis S, Baker C, Eichler EE, Meltzer PS, et al: Rare structural variants disrupt multiple genes in neurodevelopmental pathways in schizophrenia. Science. 2008, 320: 539-543. 10.1126/science.1155174.
McCarroll SA, Hadnott TN, Perry GH, Sabeti PC, Zody MC, Barrett JC, Dallaire S, Gabriel SB, Lee C, Daly MJ, Altshuler DM: Common deletion polymorphisms in the human genome. Nat Genet. 2006, 38: 86-92. 10.1038/ng1696.
Conrad DF, Andrews TD, Carter NP, Hurles ME, Pritchard JK: A high-resolution survey of deletion polymorphism in the human genome. Nat Genet. 2006, 38: 75-81. 10.1038/ng1697.
Hinds DA, Kloek AP, Jen M, Chen X, Frazer KA: Common deletions and SNPs are in linkage disequilibrium in the human genome. Nat Genet. 2006, 38: 82-85. 10.1038/ng1695.
Urban AE, Korbel JO, Selzer R, Richmond T, Hacker A, Popescu GV, Cubells JF, Green R, Emanuel BS, Gerstein MB, Weissman SM, Snyder M: High-resolution mapping of DNA copy alterations in human chromosome 22 using high-density tiling oligonucleotide arrays. Proc Natl Acad Sci USA. 2006, 103: 4534-4539. 10.1073/pnas.0511340103.
Korbel JO, Urban AE, Grubert F, Du J, Royce TE, Starr P, Zhong G, Emanuel BS, Weissman SM, Snyder M, Gerstein MB: Systematic prediction and validation of breakpoints associated with copy-number variants in the human genome. Proc Natl Acad Sci USA. 2007, 104: 10110-10115. 10.1073/pnas.0703834104.
Perry GH, Ben-Dor A, Tsalenko A, Sampras N, Rodriguez-Revenga L, Tran CW, Scheffer A, Steinfeld I, Tsang P, Yamada NA, Park HS, Kim JI, Seo JS, Yakhini Z, Laderman S, Bruhn L, Lee C: The fine-scale and complex architecture of human copy-number variation. Am J Hum Genet. 2008, 82: 685-695. 10.1016/j.ajhg.2007.12.010.
Campbell PJ, Stephens PJ, Pleasance ED, O'Meara S, Li H, Santarius T, Stebbings LA, Leroy C, Edkins S, Hardy C, Teague JW, Menzies A, Goodhead I, Turner DJ, Clee CM, Quail MA, Cox A, Brown C, Durbin R, Hurles ME, Edwards PA, Bignell GR, Stratton MR, Futreal PA: Identification of somatically acquired rearrangements in cancer using genome-wide massively parallel paired-end sequencing. Nat Genet. 2008, 40: 722-729. 10.1038/ng.128.
Mills RE, Luttig CT, Larkins CE, Beauchamp A, Tsui C, Pittard WS, Devine SE: An initial map of insertion and deletion (INDEL) variation in the human genome. Genome Res. 2006, 16: 1182-1190. 10.1101/gr.4565806.
Khaja R, Zhang J, MacDonald JR, He Y, Joseph-George AM, Wei J, Rafiq MA, Qian C, Shago M, Pantano L, Aburatani H, Jones K, Redon R, Hurles M, Armengol L, Estivill X, Mural RJ, Lee C, Scherer SW, Feuk L: Genome assembly comparison identifies structural variants in the human genome. Nat Genet. 2006, 38: 1413-1418. 10.1038/ng1921.
Levy S, Sutton G, Ng PC, Feuk L, Halpern AL, Walenz BP, Axelrod N, Huang J, Kirkness EF, Denisov G, Lin Y, MacDonald JR, Pang AW, Shago M, Stockwell TB, Tsiamouri A, Bafna V, Bansal V, Kravitz SA, Busam DA, Beeson KY, McIntosh TC, Remington KA, Abril JF, Gill J, Borman J, Rogers YH, Frazier ME, Scherer SW, Strausberg RL, et al: The diploid genome sequence of an individual human. PLoS Biol. 2007, 5: e254-10.1371/journal.pbio.0050254.
Wheeler DA, Srinivasan M, Egholm M, Shen Y, Chen L, McGuire A, He W, Chen YJ, Makhijani V, Roth GT, Gomes X, Tartaro K, Niazi F, Turcotte CL, Irzyk GP, Lupski JR, Chinault C, Song XZ, Liu Y, Yuan Y, Nazareth L, Qin X, Muzny DM, Margulies M, Weinstock GM, Gibbs RA, Rothberg JM: The complete genome of an individual by massively parallel DNA sequencing. Nature. 2008, 452: 872-876. 10.1038/nature06884.
Korbel JO, Urban AE, Affourtit JP, Godwin B, Grubert F, Simons JF, Kim PM, Palejev D, Carriero NJ, Du L, Taillon BE, Chen Z, Tanzer A, Saunders AC, Chi J, Yang F, Carter NP, Hurles ME, Weissman SM, Harkins TT, Gerstein MB, Egholm M, Snyder M: Paired-end mapping reveals extensive structural variation in the human genome. Science. 2007, 318: 420-426. 10.1126/science.1149504.
Kidd JM, Cooper GM, Donahue WF, Hayden HS, Sampas N, Graves T, Hansen N, Teague B, Alkan C, Antonacci F, Haugen E, Zerr T, Yamada NA, Tsang P, Newman TL, Tuzun E, Cheng Z, Ebling HM, Tusneem N, David R, Gillett W, Phelps KA, Weaver M, Saranga D, Brand A, Tao W, Gustafson E, McKernan K, Chen L, Malig M, et al: Mapping and sequencing of structural variation from eight human genomes. Nature. 2008, 453: 56-64. 10.1038/nature06862.
Chen J, Kim YC, Jung YC, Xuan Z, Dworkin G, Zhang Y, Zhang MQ, Wang SM: Scanning the human genome at kilobase resolution. Genome Res. 2008, 18: 751-762. 10.1101/gr.068304.107.
Raphael BJ, Volik S, Yu P, Wu C, Huang G, Linardopoulou EV, Trask BJ, Waldman F, Costello J, Pienta KJ, Mills GB, Bajsarowicz K, Kobayashi Y, Sridharan S, Paris PL, Tao Q, Aerni SJ, Brown RP, Bashir A, Gray JW, Cheng JF, de Jong P, Nefedov M, Ried T, Padilla-Nash HM, Collins CC: A sequence-based survey of the complex structural organization of tumor genomes. Genome Biol. 2008, 9: R59-10.1186/gb-2008-9-3-r59.
Bignell GR, Santarius T, Pole JC, Butler AP, Perry J, Pleasance E, Greenman C, Menzies A, Taylor S, Edkins S, Campbell P, Quail M, Plumb B, Matthews L, McLay K, Edwards PA, Rogers J, Wooster R, Futreal PA, Stratton MR: Architectures of somatic genomic rearrangement in human cancer amplicons at sequence-level resolution. Genome Res. 2007, 17: 1296-1303. 10.1101/gr.6522707.
Bentley D, Balasubramanian S, Swerdlow H, Smith G, Milton J, Brown C, Hall K, Evers D, Barnes C, Bignell H, Boutell J, Bryant J, Carter R: Accurate whole human genome sequencing using reversible terminator chemistry. Nature. 2008, 456: 53-59. 10.1038/nature07517.
PEMer Package. [http://sv.gersteinlab.org/pemer]
Li H, Ruan J, Durbin R: Mapping short DNA sequencing reads and calling variants using mapping quality scores. Genome Res. 2008, 18: 1851-1858. 10.1101/gr.078212.108.
Rozowsky J, Euskirchen G, Auerbach RK, Zhang ZD, Gibson T, Bjornson R, Carriero N, Snyder M, Gerstein MB: PeakSeq enables systematic scoring of ChIP-seq experiments relative to controls. Nat Biotechnol. 2009, 27: 66-75. 10.1038/nbt.1518.
Tuzun E, Sharp AJ, Bailey JA, Kaul R, Morrison VA, Pertz LM, Haugen E, Hayden H, Albertson D, Pinkel D, Olson MV, Eichler EE: Fine-scale structural variation of the human genome. Nat Genet. 2005, 37: 727-732. 10.1038/ng1562.
Pop M, Salzberg SL: Bioinformatics challenges of new sequencing technology. Trends Genet. 2008, 24: 142-149.
Zhang Z, Schwartz S, Wagner L, Miller W: A greedy algorithm for aligning DNA sequences. J Comput Biol. 2000, 7: 203-214. 10.1089/10665270050081478.
Kent WJ: BLAT - the BLAST-like alignment tool. Genome Res. 2002, 12: 656-664.
Iafrate AJ, Feuk L, Rivera MN, Listewnik ML, Donahoe PK, Qi Y, Scherer SW, Lee C: Detection of large-scale variation in the human genome. Nat Genet. 2004, 36: 949-951. 10.1038/ng1416.
Mills RE, Bennett EA, Iskow RC, Devine SE: Which transposable elements are active in the human genome?. Trends Genet. 2007, 23: 183-191. 10.1016/j.tig.2007.02.006.
Chiu KP, Wong CH, Chen Q, Ariyaratne P, Ooi HS, Wei CL, Sung WK, Ruan Y: PET-Tool: a software suite for comprehensive processing and managing of Paired-End diTag (PET) sequence data. BMC Bioinformatics. 2006, 7: 390-10.1186/1471-2105-7-390.
Ruan Y, Ooi HS, Choo SW, Chiu KP, Zhao XD, Srinivasan KG, Yao F, Choo CY, Liu J, Ariyaratne P, Bin WG, Kuznetsov VA, Shahab A, Sung WK, Bourque G, Palanisamy N, Wei CL: Fusion transcripts and transcribed retrotransposed loci discovered through comprehensive transcriptome analysis using Paired-End diTags (PETs). Genome Res. 2007, 17: 828-838. 10.1101/gr.6018607.
Bashir A, Volik S, Collins C, Bafna V, Raphael BJ: Evaluation of paired-end sequencing strategies for detection of genome rearrangements in cancer. PLoS Comput Biol. 2008, 4: e1000051-10.1371/journal.pcbi.1000051.
al EPCe: Identification and analysis of functional elements in 1% of the human genome by the ENCODE pilot project. Nature. 2007, 447: 799-816. 10.1038/nature05874.
Lee S, Cheran E, Brudno M: A robust framework for detecting structural variations in a genome. Bioinformatics. 2008, 24: i59-67. 10.1093/bioinformatics/btn176.
Smith TF, Waterman MS: Identification of common molecular subsequences. J Mol Biol. 1981, 147: 195-197. 10.1016/0022-2836(81)90087-5.
Consortium TIH, Frazer KA, Ballinger DG, Cox DR, Hinds DA, Stuve LL, Gibbs RA, Belmont JW, Boudreau A, Hardenbol P, Leal SM, Pasternak S, Wheeler DA, Willis TD, Yu F, Yang H, Zeng C, Gao Y, Hu H, Hu W, Li C, Lin W, Liu S, Pan H, Tang X, Wang J, Wang W, Yu J, Zhang B, Zhang Q, et al: A second generation human haplotype map of over 3.1 million SNPs. Nature. 2007, 449: 851-861. 10.1038/nature06258.
Margulies M, Egholm M, Altman WE, Attiya S, Bader JS, Bemben LA, Berka J, Braverman MS, Chen YJ, Chen Z, Dewell SB, Du L, Fierro JM, Gomes XV, Godwin BC, He W, Helgesen S, Ho CH, Irzyk GP, Jando SC, Alenquer ML, Jarvie TP, Jirage KB, Kim JB, Knight JR, Lanza JR, Leamon JH, Lefkowitz SM, Lei M, Li J, et al: Genome sequencing in microfabricated high-density picolitre reactors. Nature. 2005, 437: 376-380.
Dohm JC, Lottaz C, Borodina T, Himmelbauer H: Substantial biases in ultra-short read data sets from high-throughput DNA sequencing. Nucl Acids Res. 2008, 36: e105-10.1093/nar/gkn425.
Lander ES, Waterman MS: Genomic mapping by fingerprinting random clones: a mathematical analysis. Genomics. 1988, 2: 231-239. 10.1016/0888-7543(88)90007-9.
Altschul SF, Gish W, Miller W, Myers EW, Lipman DJ: Basic local alignment search tool. J Mol Biol. 1990, 215: 403-410.
1000 Genomes Project. [http://1000genomes.org]
Funding was provided, in part, by the EU sixth framework programme (JOK) and by the Yale Center of Excellence in Genomic Science grant provided by the NIH (AA, XM, NC, PC, ZZ, MS, and MBG). We thank other members of the 1000 Genomes project  for valuable discussions and for sharing data sets. Furthermore, we thank the Yale High Performance Computation Center (funded by NIH grant: RR19895-02) for technical support.
JK and MG conceived of the study, and participated in its design and coordination. JK and AA performed the simulations. JK, AA, XM, NC, PC, MS, and MG helped setup the PEMer pipeline. JK, AA, XM, NC, PC, ZZ, MS, and MG analyzed the processed paired-end sequence read data. JK, AA, XM, and MG wrote the manuscript. All authors read and approved the final manuscript.
Electronic supplementary material
About this article
Cite this article
Korbel, J.O., Abyzov, A., Mu, X.J. et al. PEMer: a computational framework with simulation-based error models for inferring genomic structural variants from massive paired-end sequencing data. Genome Biol 10, R23 (2009). https://0-doi-org.brum.beds.ac.uk/10.1186/gb-2009-10-2-r23
- Reference Genome
- Additional Data File
- Reconstruction Efficiency
- Single Cutoff
- Large Insert Size